Overview

NDM2272 is a digital drive that Noketech developed for 110/130 two-phase hybrid motor.It adopts the latest DSP technology of Ti, and taking advanced digital filtering technology, anti-resonance technology and real-time precision current control technology to make it realize precise smooth operation, extra low noise. It's suitable for semiconductor electronic processing equipment, laser processing, packing and small CNC equipment.

 Applicable motor: 110、130 seires two-phase hybrid stepping motor.

Parameter setting switch description

1）Working (dynamic) current setting

2）Quiescent  (static) current setting

Static current can be set by SW4 DIP switch, on means Static current is the half of dynamic current, off means that the quiescent current is the same as the dynamic current.In general use, SW4 should be set to on to reduce the heat of the motor and drive and improve the reliability.  About 400ms after the pulse train stops , the current is automatically reduced to about half (60% of the actual value), and the calorific value is theoretically reduced to 36%.

3）Micro step setting

 NDM2272 is a precision three-phase hybrid stepping drive, which can provide a maximum of 512 subdivision settings, the specific settings are shown as below.

Typical wiring case

Wiring diagram is as folows when using PLC control.

                                                   Wiring diagram when PLC control NDM2272

Note:

When the user directly connects the 3NDM2280 to main power, the protective GND of drive must be reliably connected to the protective GND of the device. It is recommended that the user supply power to the 3NDM2280 through an isolated transformer. It is recommended that the isolated transformer adopt 220VAC input and 180VAC output.